| |
|
| TEL：0575-87163555 |
| |
FAX：0575-87276979 |
|
|
|
HL-90 continuous casting and tandem rolling steel tube production line
HL-90 continuous casting and tandem rolling steel tube production line is that the domestic most advanced copper is in charge of making production line , it realize copper procedure produced to in charge of control, the automatic degree is high, great improvement production efficiency, have lighten labour intensity, has reduced the production cost. The whole production line has also realized that man-machine interface , PLC can programme and control , the silicon controlled rectifier direct current figure adjusts the speed, safe shutdown chain. |
| |
|
|
|
| |
|
|
HL-90C three rollers of planetary rolling mills
Charge-in cast tube base
|
Ф80-90×20-25mm |
Length of cast tube base of charge-in |
≤15m |
Specification after rolling |
Ф50×2.5mm；Ф47×2.3mm；Ф45×2.3mm |
Moment of the roll (greatest ) |
10KNM |
Roll out the speed |
13-17m/min |
Send the speed |
0.7-1.2m/min |
|
| |
|
|
|
| |
|
|
HL-XM90C mills surface machine
Base material of cast tube
|
Copper and copper alloy (cast the state) |
Diameter of base of the cast tube
|
Ф80-Ф90mm |
Thickness of base of the cast tube
|
≥10mm |
| Length of base of the cast tube |
3.5-15m |
| Mill the thickness of paring |
0.5±0.20mm |
| Send to the speed |
0.7-1.4m/min |
|
| |
|
HL-SLL1510 two and contacts and jointly draws the aircrew
Draw strength the most greatly
|
1# Drawing machine15T；2# Drawing machine 10T |
Draw the speed
|
1# Drawing machine0-65m/min(Not so adjustable as grade）；2# Drawing machine0-85m/min(Not so adjustable as grade） |
Charge-in pipe specification
|
1# Drawing machine(max) 50mm；2# Drawing machine(max) 40mm |
| Produce the material pipe specification |
1# Drawing machine(max) 40mm；2# Drawing machine(max) 30mm |
|
| |
|
|
| |
|
|
